Press Releases

September 26, 2017
Ottawa (ON)

New study analyzes causes of 2010 landslide in Saint-Jude, Quebec

River erosion and high groundwater pressure considered triggers of 275 m wide landslide in sensitive clay

In May 2010, a landslide devastated the municipality of Saint-Jude, Quebec, and was responsible for four fatalities when a house was destroyed by sediment movement. Building on investigations that took place immediately after the landslide, a new study published today in the Canadian Geotechnical Journal discusses triggers of the Saint-Jude landslide that occurred in nearly 10,000-year-old sensitive clay sediment that “liquefies” when disturbed.

The triggers of the landslide were concluded to be of natural origin. Sediment erosion by the Salvail River, which runs along the base of the slope of land where the landslide occurred, and high groundwater pressure under the river bed decreased stability of the clay sediments at the bottom of the slope.

The landslide, which happened around 50 km northeast of Montréal, was determined to have occurred in two successive phases, with two failure surfaces at two different elevations in the ground that caused dislocation of the sensitive clays. “Such features have never been clearly identified before in spreads in sensitive clays,” says Dr. Ariane Locat, lead author of the paper and Professor in the Department of Civil Engineering and Water Engineering at Université Laval.

By studying the properties of the soil involved in the landslide and the shape and positions of the clay debris using field and laboratory tests, the team of researchers from Université Laval, Sherbrooke University, and the Ministère des Transports, de la Mobilité durable et de l'Électrification des transports reconstructed the landslide and classified it a “large” and “complex spread,” a typical landslide type occurring in sensitive clays. The landslide had a width of 275 m and a volume of debris of ~520,000 m3, which could fill over 200 Olympic-sized swimming pools. The debris included blocks of land that protruded upward and blocks of land that had lowered—the alternating peaks and valleys are known as horst and graben formations and are characteristic of spreads in sensitive clays.

“Scientific knowledge on spreads in sensitive clays is limited. Investigations of case studies, like the one presented in this study of the Saint-Jude landslide, give us new information and insights on characteristics of spreads and on conditions in which they occur,” Locat says. “These studies are essential to the development of tools allowing for better identification of zones potentially exposed to spreads and to protect the population from this natural hazard.”

Landslides occurring in sensitive clays are the most threatening natural hazard in Quebec due to the unstable nature of the clay sediments and because 90% of the province’s population resides within areas where these sensitive clays, remnants of the Champlain Sea, are located.

The article, “The Saint-Jude landslide of 10 May 2010, Quebec, Canada: Investigation and characterization of the landslide and its failure mechanism” by Ariane Locat, Pascal Locat, Denis Demers, Serge Leroueil, Denis Robitaille, and Guy Lefebvre was published today in Canadian Geotechnical Journal.




Citation
Please cite Canadian Geotechnical Journal as the source of this story and include a hyperlink to the research study: dx.doi.org/10.1139/cgj-2017-0085.

Media contact:
Jean-François Huppé, Université Laval
+1 418 656-7785, Jean-Francois.Huppe@dc.ulaval.ca

Samuel Auger, Université Laval
+1 418 656-2131 ext 8077, Samuel.Auger@dc.ulaval.ca

Author contact:
Dr. Ariane Locat, Professor
Department of Civil Engineering and Water Engineering, Université Laval
+1 418 656-2992, ariane.locat@gci.ulaval.ca

About the Journal
Published since 1963, Canadian Geotechnical Journal is a monthly journal featuring articles, notes, and discussions related to new developments in geotechnical and geoenvironmental engineering, and applied sciences. The topics of papers written by researchers and engineers/scientists active in industry include soil and rock mechanics, material properties and fundamental behaviour, site characterization, foundations, excavations, tunnels, dams and embankments, slopes, landslides, geological and rock engineering, ground improvement, hydrogeology and contaminant hydrogeology, geochemistry, waste management, geosynthetics, offshore engineering, ice, frozen ground and northern engineering, risk and reliability applications, and physical and numerical modelling.

Disclaimer
Canadian Science Publishing publishes the NRC Research Press suite of journals but is not affiliated with the National Research Council of Canada. Papers published by Canadian Science Publishing are peer-reviewed by experts in their field. The views of the authors in no way reflect the opinions of Canadian Science Publishing. Requests for commentary about the contents of any study should be directed to the authors.